Opel Blitz from Ebob 

                                                                                                                                                         back to the Gallery Index

 

DSCN1873_cr.jpg (313518 Byte)

 

 

The model of the Opel Blitz is from Ebob. It is done in white metal and the finished model is quite heavy.  The scale is 1:56. The quality of the casting is very good. The parts fit good together for a model in white metal. But I found it very difficult to glue the parts and make them hold. I used a combination of superglue with activator for smaller parts and 2-component-glue for the bigger parts.
I have still two more unfinished kits of this models in my shelf but gluing them together stops me from doing them in the moment.

Here are some WiP pictures from the model. First undercoated (dark yellow over black with Humbrol emanel paints) and then with the camo pattern spraypainted:

DSCN0946.JPG (169067 Byte)

DSCN1659.JPG (130177 Byte)

DSCN1660.JPG (129959 Byte)

 

I placed the truck  beside my finished SdKfz 251 (from BAM) and wondered how I achieved the dark look from the same base colors last time.

DSCN1662.JPG (128887 Byte)

 

First I gave the whole model a wash with a dark brown oil color, thinned down with turpentine. Then I repeat this process and especialy shaded all bents. The clippings were painted with beige acryl paint first, followed by darkbrown. The rust is added by the use of oil paint (burnt Sienna) with turpentine. The impression of bare metal was achieved with the graphite of a soft pencil.

I used dry pigments in different shades for further weathering. This gave a good impression of dirt and dust.

The glass plates are cut from overhead transparency and had been glued with wood glue.

DSCN1672.JPG (126052 Byte)

DSCN1673.JPG (124803 Byte)

DSCN1674.JPG (124175 Byte)

DSCN1675.JPG (124711 Byte)

DSCN1670.JPG (121943 Byte)

DSCN1671.JPG (124695 Byte)

DSCN1676.JPG (117811 Byte)

 

Here are a few detail shots of the finished model:

DSCN1677.JPG (138991 Byte)

DSCN1679.JPG (130051 Byte)

DSCN1678.JPG (142446 Byte)

DSCN1685.JPG (148952 Byte)

 

In the end I could achieve nearly the same look as my already finished models and I am quite happy with the result. In the following pictures the Opel Blitz is shown with my Kübelwagen, Hannomag and Tiger I.

The German Grenadiers are from Artizan Design and Black Tree Design. The Kübelwagen is from Company B with driver and passenger from BAM, the SdKfz 251/1 is from BAM too. The Tiger I is from Hobby Master.  The scale of all models is 1:56, the miniatures are 28 mm.

DSCN1680.JPG (33655 Byte)

DSCN1681.JPG (135259 Byte)

DSCN1682.JPG (135869 Byte)

 

The following pictures shows some pictures of the Opel Blitz in some of my selfmade terrain (Hedgerows and Fur Mats)                       

DSCN1874small.JPG (222179 Byte)

DSCN1870small.jpg (240496 Byte)

DSCN1844small.jpg (243349 Byte)

By clicking this link you can open a bigger version of the picture above (2048x1536)

 

DSCN1840small.JPG (242766 Byte)

DSCN1869small.JPG (255715 Byte)

 

 

                                                                                                                                                                                         back to the Gallery Index